Steel structure engineering construction to do a good job of management

In the process of infrastructure construction, quality management and comprehensive control should be done well. For steel structure foundation, it is mostly independent infrastructure of reinforced concrete type, and the foundation part is the same as other engineering foundation parts. In the process of construction management, we should pay attention to the management of embedded bolt foundation engineering and other steel structure foundation engineering, control the bolt spacing within a reasonable range, adjust the height deviation better, prevent the quality of the project from being affected, and ensure the control of each process.

First, bolts should be made to install the formwork. Can prepare the thickness of about 20mm steel plate, a total of three pieces, one is the top plate, one is the bottom plate, one is the vertical plate. For the top plate and bottom plate, the size should be the same as the steel column bottom plate, and the position and size of the bolt holes should be selected according to the requirements. For vertical plates, it is necessary to be less than the exposed height of the embedded bolts and to handle the sockets. The bolts can be welded by reinforcing bars to ensure the firmness of the whole structure. The template needs to be installed and used several times for good handling. Secondly, before pouring concrete, the bolt group should be buried, and the fixed method should be used to improve the stability and ensure that the deviation meets the requirements. To do a good job of retest, timely find the problem, take correct measures to make up for the shortage, so as not to affect the quality of construction.

Construction of maintenance structure: for maintenance structure, mainly doors and Windows, wall panels, roof and other steel structures, should be combined with the specific construction characteristics and requirements of reasonable construction, to ensure that the overall steel structure construction effect meets the requirements of standardization, to prevent quality problems and defects in the construction process. In particular, the steel structure of doors and Windows needs to ensure strength and stability.