Maintenance requirements for steel structure plant

1, Steel structure plant electric lighting equipment, wire can not be directly tied on the steel member, should be set up pipe or trough barrier device, to avoid electric shock.

2, steel structure workshop should be regularly maintained, in order to extend the overall appearance and service life of steel structure workshop.

3. After the steel structure plant is in good condition, the owner is strictly prohibited to change the structure without authorization, cannot dismantle any bolt members, cannot add or reduce the partition wall, such as the need to change the need to negotiate with the steel structure company can be changed.

4, steel structure workshop should be regularly cleaned and maintained, generally at least once a year to check the routine, in order to find potential problems.

5. If the metal plate surface is damaged, it should be repaired in time to avoid the corrosion of the metal plate. If there is a need to choose high elastic nano coating, used to protect the metal roof panel, and play an effective role in heat insulation and waterproof, saving indoor air conditioning power.

6, the external wall cleaning of steel structure factory building, largely depends on the environment. When cleaning the surface, pay attention to the phenomenon of scratching, avoid the use of bleaching ingredients and abrasive washing products, steel ball, wear-resistant products can not be used, with clean water from top to bottom scouring.

7. Elevation and axis shall be verified according to the requirements of planning and drawings and the actual situation.

8. Before construction, the theodolite should be used to conform to the axis, and the level should be used to determine the elevation and make some corresponding records. After determining the axis and elevation, put the large sample, and then put the small sample, the order can not be wrong.

9. When positioning the rigid frame, the column foot of the rigid frame should be avoided from colliding with the bolt to avoid deformation or damage of the bolt.